Resistor Color Duo

Instructions

If you want to build something using a Raspberry Pi, you'll probably use resistors. For this exercise, you need to know two things about them:

• Each resistor has a resistance value.
• Resistors are small - so small in fact that if you printed the resistance value on them, it would be hard to read.

To get around this problem, manufacturers print color-coded bands onto the resistors to denote their resistance values. Each band has a position and a numeric value.

The first 2 bands of a resistor have a simple encoding scheme: each color maps to a single number. For example, if they printed a brown band (value 1) followed by a green band (value 5), it would translate to the number 15.

In this exercise you are going to create a helpful program so that you don't have to remember the values of the bands. The program will take color names as input and output a two digit number, even if the input is more than two colors!

The band colors are encoded as follows:

• Black: 0
• Brown: 1
• Red: 2
• Orange: 3
• Yellow: 4
• Green: 5
• Blue: 6
• Violet: 7
• Grey: 8
• White: 9

From the example above: brown-green should return 15 brown-green-violet should return 15 too, ignoring the third color.

You need to implement the function

value :: (Color, Color) -> Int

that only accepts two colors and produces the resistor's numeric value component of its resistance.

Bonus - Property Testing:

This exercise is a good opportunity to write some property tests. If you haven't written any before here are some resources:

1. School of Haskell.
2. Real world Haskell

We have provided one sample QuickCheck property test in the test file.

Examples of properties that can be tested:

• value (x, y) >= 10 for all (x, y) where x isn't Black

• Calling show on value (x, y) produces the reverse String of calling show on value (y, x).

• All colors have unique names. (For any two colors, if the colors are different, so are their names.)

---

Source

Maud de Vries, Erik Schierboom